GUITAR BUILD PROJECTS, CUSTOMISATION & DIY TECH
After deciding to swap around the necks on my Jaguar projects again - I need to swap the hardware out on this lacquered AllParts JGRO neck. There are also a few areas of damage I need to clear up...
I want a polished finish for this ash Jaguar body - but I also want a super-thin nitro coat. Here's how I achieve a high gloss in just six, *(or seven) steps.
...just call me "Four-Jags!"...
Setting up and personalising the action on my customised "Original '60's" Fender Jaguar
Swapping out the nickel hardware on a Fender '65 Re-issue Jaguar neck, for a replacement set, in gold.
I can finally see well enough to drop some Creamery "Alt 88"Jaguar pickups into my Custom spec Fender "US Original '60's" Jaguar. I'm wiring them up with a "Johnny Marr" schematic, and I'm especially looking forward to testing out the additional "neck and bridge in series" combination.
Filling a few minor "pinholes", tinting and toning the colour coat, and applying a final clear gloss lacquer topcoat on a white blonde "Mary Kaye" type nitro finish.
I've had a while to rethink my original plans for this Jaguar, and instead of a "natural", shellacked finish - I'm going to spray a "white blonde" nitro finish instead.
More essential body prep, before the enforced lay-off for my upcoming eye op. This time it's sealing and fine sanding an Ash Jaguar body.
The first stage of fine-finishing this swamp ash Jaguar body, is to apply a grain filler - followed by careful flat-sanding and burnishing
Garageland 