GUITAR BUILD PROJECTS, DRUM FETTLING, CUSTOMISATION & DIY TECH
Continuing to fit out the restored shells for my basic, 22,16,14, 1970's Premier "Elite" drum kit. Now, the final piece of the kit - the 16" floor tom
Continuing to fit out the restored shells for my basic, 22,16,14, 1970's Premier "Elite" drum kit. This time - it's the turn of the 14" rack tom
Continuing the saga of the repair, re-fit and preparation of two Jaguar necks, for a couple of my project builds. Lacquer repairs, finishing, hardware installation, and fingerboard toning
I want a polished finish for this ash Jaguar body - but I also want a super-thin nitro coat. Here's how I achieve a high gloss in just six, *(or seven) steps.
So much to catch up on... Next up - polishing the nitro finish coat on my Warmoth JagStang body. I'm looking for a simplified process to save time, and to help prevent rubbing through the thin lacquer coats.
Finishing the painted headstock on my Musikraft custom Jaguar neck. A few gremlins in the detail - but maybe I just have to live with some of my practical limitations, and focus on the overall effect.
Repairing damage to the neck pocket area - where an over-tightened neck plate has compressed the body wood, and split the polyester finish.
The lacquer on the Hardtail Stratocaster should have cured enough to polish up reasonably well. It's a bit of a monotonous slog to work through all of the various grades of grit, but it promises to be well worth the effort.
The clear nitro lacquer on "Dragoncaster" body has been curing for more than a couple of months now. Polishing can be a lengthy job, and I wanted to be able to set aside a few, consecutive days. With a suitable gap in the schedule coming up - it's time to crack on.
The urban dictionary has an entirely different meaning - Hmmm. But polishing this Jaguar is actually quite a "Zen" way to spend a dull autumn day.
Garageland 